Dental Implant Guided Surgery Kit — Complete guided-surgery system — 36 DLC-coated stepped drills in a 6 × 6 diameter/length m

This is a full-workflow kit for guided implant placement, where the osteotomy is prepared through a surgical template rather than freehand. The main drill block is laid out as a 6 × 6 matrix: six diameters from Ø2.2 mm to Ø4.7 mm down the left edge, six working lengths from L7 to L18 across the bottom, so every drill in the sequence has a fixed home position and the clinician reads diameter and depth directly off the tray. Drills are stepped with an integrated stop collar, which is what makes them guided rather than conventional — the collar seats against the guide sleeve in the surgical template and physically limits penetration to the planned depth. The dark drill surface indicates a DLC or titanium-nitride type coating, which extends cutting-edge life and reduces heat generation during sequential drilling. Each diameter row is colour-coded through its silicone stopper: purple, yellow, red, green, blue and black. The right-hand section carries the supporting instruments — lance pilot and parallel pilot drills for initial site marking, extension and lab drivers for carrying components, tissue punches in 4 mm, and hex drivers at 1.2 and 1.25 mm for abutment screws. A beam-type torque wrench with removable silicone grips sits across the top of the tray in its own labelled channel. The tray is a branded white autoclavable block with a clear hinged lid, marked with the Artifol Enterprises logo on the front face, and holds the entire system as one sterilisable unit.